|
Before we began to construct the sawhorse, let's discuss the supply's
listed above. We choose the black plastic sawhorse brackets because we
wanted something that was lightweight, black in color and easy to assemble
and disassemble and brackets that would allow different width's of the top
board. The sawhorse bracket box shown above (which we purchased at Lowe's) is perfect for what we wanted
and we highly recommend them for your use.
The four 30" long 2x4's are specifically for the legs of the sawhorse
and can be any length that you desire. Whatever size you select, be it 24",
30", 36" or more, will determine the height of the sawhorse and
ultimately how high the person is that is placed on the sawhorse. A tall
person might prefer a longer leg - say about a 36" because that would put the sawhorse high enough
to work on the submissive without having to bend over and put a
strain on your back. A shorter person might prefer shorter legs,
say 24" or so. You can actually make them any height you want or have
multiple heights if you prefer, but you'll need four of each height you
choose. If you want, you can cut these yourself or have them cut to size
at the lumber yard. The quality of the wood is not important since you
will be painting over it anyway.
The top piece is the board that goes across the top of the sawhorse
from one sawhorse bracket to another. We have selected a 2" x 4" - 38"
long board, but again you can customize it to any length you desire. Most females are between five and
six foot tall so if you're using your sawhorse for females only, than a
38" board should work out OK. A good way to tell is to measure your
subject while on all fours (doggy style) from the tip of their head to the
roundest point of the buttocks. To that number add a 6 extra inches on
each end of the board for movement and to that add 4 inches for attaching
to the sawhorse brackets. So then if they measure 30" from head to tail
and you add 6" for subject movement and 4" for attaching to the brackets,
you end up with a 40" board (30"+6"+4"=40").
Also, please note that you will need to drill a hole 2" from each end of
the board so that your top board can house the bolt that will attach to
the sawhorse brackets on each end..
IT IS IMPORTANT to remember that you'll need sawhorse brackets that accept
different widths of the top board. If you click on the photo of the
sawhorse bracket box above you will see that they advertise that you can use a 4", 6" or 12" wide top board. The reason
this is important is that wider boards are more comfortable for longer
play times and for people who are carrying more weight. The heaver the
person, the more uncomfortable a narrow board can be so you want to
purchase sawhorse brackets that will accept multiple widths of top boards.
Also, if you turn your subject around and have them lay back on the top of
the sawhorse, a wider board is much safer. Keep in mind, the more comfortable your subject, the longer
they will want to stay on the sawhorse. Whatever discomfort they may feel, should be that
which is administered AFTER they are positioned on the sawhorse.
The only thing you need to consider about the eye bolts is that
they be the type that have wood screw threads on one end so that you can
easily screw them into the legs of your sawhorse. And of course, the can of
flat black spray paint is so that you can paint the raw wood you're using in
the project. Also, you'll need to purchase a
small piece of sponge foam carpet padding - something about 3' wide and
the width of the padding. So you may end up with a piece 3'wide by 50"
long depending upon the width of the roll of padding. This stuff is very
inexpensive so pick
up a nice thick piece.
In addition to the hardware store trip, you'll also need to
make a stop at a fabric store. Here you will purchase the black vinyl
fabric for covering the top board. Again like padding, this comes in a
fixed roll width (say 40" wide) and your option is how wide a piece you want
them to cut for you (say 3' wide) so you may end up with a piece that's 3' x 40"
or so. The cost for the vinyl fabric we purchased was around $5.00 and we
have enough to do top boards in various sizes.
|